砂巖浮雕的質量問題一般都出在砂巖開裂。那么想在鄭州購買砂巖浮雕裝飾的朋友們應該如何選擇一家好的砂巖浮雕公司呢？今天就讓金蘭草砂巖浮雕公司的小編來給大家說一說。
    The quality problem of the sandstone relief is generally out of the sandstone cracking. So how do you want to buy sandstone relief decoration in Zhengzhou friends should be how to choose a good sandstone relief company? Today let Gold Orchid grass sandstone relief company small to say for everyone.

    相信大家都知道砂巖浮雕構件在現代建筑中有著廣泛的使用，如果要購買一個好的砂巖浮雕那么就應該學會選擇，同時對其產生原因有較為深刻的了解也是非常必要。
    It is believed that all of them know that the relief structure of sandstone is widely used in modern buildings. If you want to buy a good sandstone relief then you should learn to choose.

    一般構件開裂的程度會由于地區不同而產生差異，比如地區氣候比較潮濕，相對濕度較高，溫度也較高，就會使構件的含水率比規定高上許多。使用一段時間后出現的開裂現象也是人們普遍關注的問題，這不僅影響了消費者使用構件的信心，也對業主使用安全造成威脅。
    The degree of general component cracking will be due to different regions, such as the regional climate is relatively wet, the relative humidity is higher, the temperature is higher, it will make the water content of the component is higher than the provisions. The use of a period of time after the emergence of cracking phenomenon is also widespread concern, which not only affects the consumer confidence in the use of components, but also to the owners of the use of security threats.

    引起砂巖浮雕構件產生裂縫的原因還是很多的，可能是由于內部鋼筋銹蝕導致，也可能是構件本身質量問題，不過最重要的原因就是構件收縮變形。
    Caused by the cracks of the sandstone relief components is still a lot of, may be due to the corrosion of internal steel, it may be the quality of the component itself, but the most important reason is the contraction of the component.

    在這種情況下需要采取特別的烘干措施，否則很容易出現干裂現象，而在北方情況可能會好些。構件收縮時候產生的收縮力會使得構件與建筑連接部分產生拉伸導致變形，但是如果拉伸變形不能抵消收縮變形對構件的影響就會對構建造成破壞了。
    Special drying measures should be adopted in this case, otherwise it is easy to appear parch and split phenomenon, and the situation in the North may will be better. The contraction force generated during the contraction of the component causes the tension between the component and the building connections. However, if the tensile deformation can not be offset by the shrinkage deformation, the impact of the structure will be destroyed.

    砂巖浮雕行業普遍出現裂縫現象的情況下，要了解這些構件開裂原因以后就應該從這些方面入手，加強構架的干縮值、冷縮值等，如果構件的含水率超標，一定要及時進行烘干，并且注意采用從專業風干方法進行。
    Sandstone relief industry generally appear cracks in the phenomenon, to understand the causes of cracks should be from these aspects of strengthening the architecture of the dry shrinkage, shrinkage value and so on, if the excessive moisture content of component, be sure to timely drying, and pay attention to the use of from a professional air drying method.

    因此一般砂巖浮雕構件出現裂痕主要是在連接部分以及連接縫地方，裂縫的寬度和構件自身性能也有很大關系，構件的橫向長度以及構件的干縮值、冷縮值等因素都會影響開裂的程度和情況。
    So general member of sandstone relief cracks is mainly in the connection part and a connecting local joint, crack width and component performance also have great relationship, the horizontal length of the component and the component of drying shrinkage, shrinkage value and other factors will influence cracking degree and condition of.

    以上就是我們金蘭草砂巖浮雕公司和大家分享的專業知識，如果大家還需要了解更多都可以繼續關注我們公司的文章更新。
    Above is our Gold Orchid grass sandstone relief company and share professional knowledge, if you still need more can continue to pay attention to our article update.